New to Ruckus as we have had all of our Cisco switches replaced with ICX switches.
I'm trying to find out how to find the IP address of connected devices. In Cisco, I enabled device-tracking on the ports and I could see the IP address of the device connected to the port.
Does something like that exist in the Ruckus world?
Hope you are doing well !
ICX7250-24P Switch#show arpTotal number of ARP entries: 4Entries in default routing instance:No. IP Address MAC Address Type Age Port Status1 192.168.0.2 3420.e323.9760 Dynamic 0 1/1/4 Valid2 192.168.0.3 60d0.2c1c.1cd0 Dynamic 0 1/1/2 Valid3 192.168.0.4 2479.2a25.ed00 Dynamic 0 1/1/3 Valid4 192.168.0.20 0050.56ab.abd8 Dynamic 0 1/1/1 Valid
Show arp Ethernet x/x/x ( Where each x means Unit / module / port )
ICX7250-24P Switch#show arp ethernet 1/1/21 192.168.0.3 60d0.2c1c.1cd0 Dynamic 0 1/1/2 Valid
If the device that is connected is compatible with LLDP you can enable lldp
ICX7250-24P Switch# show lldp neighbors detailLocal port: 1/1/2Neighbor: 60d0.2c1c.1cd0, TTL 104 seconds+ Chassis ID (MAC address): 60d0.2c1c.1cd0+ Port ID (MAC address): 60d0.2c1c.1cd0+ Time to live: 120 seconds+ System name : "RuckusAP"+ System description : "Ruckus R710 Multimedia Hotzone Wireless AP/SW Version: 22.214.171.124.129"+ System capabilities : bridge, WLAN access point, routerEnabled capabilities: bridge, WLAN access point+ Management address (IPv4): 192.168.0.3+ Port description : "eth0"+ Link aggregation: capable, but not aggregated+ 802.3 MAC/PHY : auto-negotiation enabledAdvertised capabilities: 10BaseT-HD, 10BaseT-FD, 100BaseTX-HD,100BaseTX-FD, 1000BaseT-FDOperational MAU type : 1000BaseT-FD+ 802.3 Power via MDI: PD port + Unknown Organizationally-Specific TLV: OUI 000142, subtype 1Value: (binary) "05"
Where 192.168.0.3 is the IP address of the Access Point that is connected on port 1/1/2
Just adding few links to the post for reference and for more details.