Showing results for 
Search instead for 
Did you mean: 

ICX8200 in Cisco Network

New Contributor


I have a project where cisco will be partly replaced with ICX 8200 Switches. The new Core will be a 8200 FiberStack.

Is there anything important what i have to consider at the uplinkports from cisco and ruckus?

Spanning Tree is set to rstp and simple. Root will be 4096 on the Ruckus.



RUCKUS Team Member

Hi Bernhard_rainer ,

Thank you for posting you query !!!

I understand that you are migrating to Ruckus from Cisco and you would like to know if anything important
to consider at uplink ports from cisco to ruckus .

There are some differences in configuration when we move from cisco to ruckus you can refer the below video for your reference :

Migrating cisco to Ruckus : VLAN TRUNKS

Migrating cisco to  Ruckus : ACCESS VLANS

Migrating cisco to  Ruckus : DYNAMIC PORT CHANNEL

Migrating cisco to  Ruckus : STATIC PORT CHANNEL

Migrating cisco to  Ruckus : STATIC ROUTES

Migrating cisco to Ruckus : INTERVLAN ROUTING

For Spanning tree you can refer the below link :

NOTE: Configuration syntax might change from one firmware to another hence I would suggest you to have a look at configuration guide once.

You can also refer the below configuration guide for your reference :

Moving Forward If this issue is not resolved , Please log a ticket with the below link so that we will help you further

I hope this information helps you

Please feel free to leave us a message if any concerns