11-18-2022 12:57 PM
Hello to anyone seeing this, I have a Brocade ICX7450-48P switch, and it needs an updated software or a new image for the operating system I believe. I have connected the switch to a PC to the serial interface, a DB9M-to-USB adaptor as instructed by Brocade, and using putty. The only thing that I see is a blank box, no info , it appears that there is no primary or secondary image on the device. If anyone has more information on this and which software I can download from the Ruckus website to put onto the switch, I would appreciate it. Also what steps to follow in putting the software onto the switch. Thanks
11-18-2022 01:48 PM - edited 11-18-2022 02:04 PM
Does your console setup work on other switches? Have you confirmed the COMM port in device manager? One of our SEs made a nice video on it here:
7450 starts around four minutes. Please check that out and let us know if you still have issues.
11-18-2022 04:53 PM
Hi Ben, My setup did work on my other switch which is also ICX7450-48P, I have 2. So I know that the switch is the issue. Also I did confirm my COMM port in the device manager and matched it in putty. Which is why it is strange that I am having this issue. I will watch this video you have shared, thank you.
11-18-2022 06:07 PM
Are you getting any output at all?
11-21-2022 10:18 AM
I am getting output, the switch is being recognized in device manager.