ICX7150 Initial Configuration

[peter_floyd_678]

I am new to managed switches. I need to configure a ICX7150-24P to have 9 Virtual LANs or Subnets. These are:

VLAN 1 - Management

VLAN 10 Computers (with 4 Ports Dedicated to 4 rooms hardwired in the house)

VLAN 20 Work Computers (with 1 dedicated ICX Port and 4 Ports off a second 8 Port Switch)

VLAN 30 Media (with 4 TV, 1 Plex Server, 1 Apple TV Port for. Total of 6 Ports from the ICX Switch)

VLAN 40 Cellphones

VLAN 50 Home Automation (with 1 Yellow Board Home Assistant, 3 EO/IR Cameras hardwired, and multiple other wireless devices

VLAN 60 VPN - with 1 Port

VLAN 70 Guest 

VLAN 80 StarLinkFallBack - with 1 Port

I have two Ruckus R550 APs that will have dedicated Ports on the ICX7150.

I have configured the names of the VLANs but now I need to configure the ports and IP Addresses. I have tried to configure the IP Addresses, but the commands are not successful.

I am using an ICX7150-24P with SPS08095h.bin for Primary and SPR08095h.bin for Secondary.

What are the necessary configuration commands for this configuration?

The access points should be configured using Trunks. How is this done?

Thanks,

Pete