ICX MAC-Auth Access Point multiple-hosts
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-24-2024 07:28 AM
Hi,
How to return Radius Attribute to configure interface for "multiple-hosts". Is there an existing Radius Attributes ?
Scenario : We have access points in bridge mode that are authenticated through MAC-Auth via a RADIUS Server.
MAC-Address from the Access point should authenticate first with MAC-Auth and other MAC should be passthrough.
Thanks,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-02-2024 10:13 AM
Hi Team
Thank you for reaching us
We do have option at interface level to operate in multiple hots mode on the switch. Below is the configuration.
- Device(config)#interface eth 1/1/1
- Device(config-if-e1000-1/1/1)#authentication auth-mode multiple-hosts
Below are few links you can refer
- https://docs.commscope.com/bundle/fastiron-09010-securityguide/page/GUID-EA4E5652-0CEE-420E-A386-325...
- https://docs.commscope.com/bundle/fastiron-09010-securityguide/page/GUID-04A0B05C-C9EA-4AD5-A3B6-CF6...
I hope this helps
Thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-03-2024 12:44 AM
Hi Chandini,
Thanks for your answer. We already configured that.
The goal here is to be able to move an access point from a switch port to another without doing static configuration on the port. That's why I would like to be able to configure the switch port interface by sending back from the radius server a radius attribute that enabling authentication auth-mode multiple-hosts.
Thanks,

