ICX 7450 copy config by SNMP

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

Hello, i have ICX 7450-48 with firmware SPR08030u.bin and ICX 7450-24 with firmware SPR08095j.bin. In oldest firmware i can copy config over TFTP by this command:

snmpset -v 2c -c <community> 192.168.0.1 1.3.6.1.4.1.1991.1.1.2.1.65.0 i 1 1.3.6.1.4.1.1991.1.1.2.1.8.0 s switch-config.cfg 1.3.6.1.4.1.1991.1.1.2.1.66.0 x C0A80002 1.3.6.1.4.1.1991.1.1.2.1.9.0 i 20

With newer firmware, the command returns the usual responses, but the file is not actually sent to the TFTP server. If I enter the "copy startup-config tftp" server command directly in the switch, the file is sent correctly. Is there any difference between these firmwares regarding this?

1 REPLY 1