cancel
Showing results for 
Search instead for 
Did you mean: 

ICX 7150 to Ruckus ZD1200 w/H510 WAP

p_tech
New Contributor III
hello Newbie question.
I am trying to connect a ZD1200 via an ICX 7150 switch to H510 APs.
 vlan 1 is native /Vlan 20 public ssid /Vlan 30 for members / Vlan 40 for media and Vlan  100 for wired connections.

I have the following config but unable to get the ZD on port 1/1/1 to connect to the APs on ports 1/1/3 - 1/1/12.

The source internet port is 1/2/1

-------------------------------------------------------------------
!
ver 08.0.61aT213
!
stack unit 1
  module 1 icx7150-24p-poe-port-management-module
  module 2 icx7150-2-copper-port-2g-module
  module 3 icx7150-4-sfp-plus-port-40g-module
!
!
!
!
!
vlan 1 name DEFAULT-VLAN by port
!
vlan 10 by port
 tagged ethe 1/1/1 ethe 1/1/11
!
vlan 20 by port
 tagged ethe 1/1/1 ethe 1/1/3
 router-interface ve 20
!
vlan 30 by port
 tagged ethe 1/1/1
 router-interface ve 30
!
vlan 40 by port
 tagged ethe 1/1/1
 router-interface ve 40
!
vlan 100 by port
 tagged ethe 1/1/1 ethe 1/1/7
 untagged ethe 1/1/8 to 1/1/9
 router-interface ve 100
!
!
!
aaa authentication web-server default local
aaa authentication login default local
boot sys fl sec
no ip dhcp-client auto-update enable
ip dhcp-server enable
no ip dhcp-server mgmt
!
ip dhcp-server pool public
 dhcp-default-router 172.16.1.1
 dns-server 8.8.8.8
 excluded-address 172.16.1.1
 lease 0 1 0
 network 172.16.1.0 255.255.255.0
 deploy
!
!
ip dhcp-server pool members
 dhcp-default-router 172.16.2.1
 dns-server  8.8.8.8
 lease 0 12 0
 network 172.16.2.0 255.255.255.0
 deploy
!
!
ip dhcp-server pool media
 dhcp-default-router 172.16.3.1
 dns-server  8.8.8.8
 lease 0 4 0
 network 172.16.3.0 255.255.255.0
 deploy
!
!
ip dhcp-server pool vlan100
 dhcp-default-router 10.10.64.1
 dns-server 10.10.64.1 8.8.8.8
 excluded-address 10.10.64.1 10.10.64.50
 lease 1 0 0
 network 10.10.64.0 255.255.254.0
 deploy
!
ip default-network 10.10.64.0/23
ip dns domain-list CI_LA
ip dns server-address 10.10.64.1 8.8.8.8
ip route 10.10.64.0/23 ethernet 1/2/1
ip route 172.16.1.0/24 ethernet 1/2/1
!
!
!
!
!
!
!
!
!
!
interface ethernet 1/1/1
 dual-mode  10
!
interface ethernet 1/1/3
 inline power
!
interface ethernet 1/1/4
 inline power
!
interface ethernet 1/1/5
 inline power
!
interface ethernet 1/1/6
 inline power
!
interface ethernet 1/1/7
 inline power
!
interface ethernet 1/1/8
 inline power
!
interface ethernet 1/1/9
 inline power
!
interface ethernet 1/1/10
 inline power
!
interface ethernet 1/1/11
 inline power
!
interface ethernet 1/1/12
 inline power
!
interface ethernet 1/3/2
 speed-duplex 1000-full
!
interface ethernet 1/3/4
 speed-duplex 1000-full
!
interface ve 20
 ip address 172.16.1.1 255.255.255.0
!
interface ve 100
 ip address 10.10.64.1 255.255.254.0
!
!
interface ve 30
 ip address 172.16.2.1 255.255.255.0
!
interface ve 40
 ip address 172.16.3.1 255.255.255.0
!
!
!
!
!
!
!
end

 
21 REPLIES 21

laptop:

d4c9.ef53.7e99  1/1/1                Dynamic      10



 172.31.255.103    d4c9.ef53.7e99   000d:05h:58m:56s   Automatic

but cannot ping any of the other addresses

This is because switch port 1/1/1/ is set to Untagged VLAN 10, hence this will be untagged traffic and none of the tagged VLAN 10 devices can be reached. Either both the devices should be on tagged VLAN 10 or untagged for inter reachability.

Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn