cancel
Showing results for 
Search instead for 
Did you mean: 

ICX 7150 Recovery

alexandr_potkin
New Contributor II

Hello all!

After doing "erase startup config" switch requires username and password. Firmware 09.00a, default super and sp-admin doesn't work.

Command "no password" doesn't work, switch still requires username and password. How I can log in now?

2 REPLIES 2

alexandr_potkin
New Contributor II

Thanks for all, problem issued for using tftpboot and downgrade firmware version

BenBeck
Moderator
Moderator

Hello, 

The procedure for this is outlined in the 'Password and Device Recovery' section of the 9000 RUCKUS FastIron Management Configuration Guide. 

https://docs.commscope.com/bundle/fastiron-09000-managementguide/page/GUID-7B91A49C-1368-4E1E-B4B2-5...

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us