ICX 7150-C10ZP command how to set up ports

[wicecchini]

Hello

I didn't find command how to set up ports to connect more devices via LAN cable. I 

I have to use ICX 7150-C10ZP as switch, please confirm I can use the 6 ports PoE, and connect others devices, I thought PoE ports 1-6 were active by default, but it seem they are not active.

So I also have to connect a modem router that will be my gateway, so I use Ruckus only as swithc, please confirm if a fixed IP address (+musk)  has to be set. 

[aalvarez6]

Hi wicecchini, 

From your query, I understand that you want to enable PoE for ports 1-6? Is that correct?

To do that, you need to access the port and enter inline power

Here is an example:

enable

conf t

inter ether 1/1/1 to 1/1/6

inline power 

Please let me know if that answers your question.

Regards, 

Ayleth Alvarez

[wicecchini]

Thanks a lot, yes I need to Enable PoE port 1-6, just 1 more question, I'll use USB-C cable via putty set as serial-COM-9600, I can have access as Read-only, I know to setup the port manual indicate I need access as Admin (super-user), so I don't understand how can I have access as super-user, in the manual there isn't password, is not clear. 

[aalvarez6 · Accepted solution]

Hello, 

I'm glad that helped with your query!

In that case, you need to have access to a super-user role. You need to ask the super user to either create a new user that you can use or make the change themselves. Normally, the default credential is a super user that you can use.
Please see more information here:
https://docs.commscope.com/bundle/fastiron-09010-securityguide/page/GUID-45A416BB-01B9-45AE-B332-134...

Regards, 

Ayleth Alvarez

[wicecchini]

Solved!

😄

Thank you so much