Firmware recovery Fastlron FESX424HF + 2XG

[pavlo_pokotylo]

I mistakenly formatted the Fastlron FESX424HF + 2XG
Please tell me how to restore the firmware.
And also where to get the firmware.

FEX-Boot>show flash
Primary image:
  FAIL - Image not exist
Secondary image:
  FAIL - Image not exist
FEX-Boot>show version
02.3.01Te6 Aug 30 2005 15:14:9
FEX-Boot>

[jijo_panangat]

Hi Pavlo,

You may refer the below doc, the cli syntax may differ as the doc is for higher release and FESX is an EOL product. You need to figure out the options with "help or ? " cmd.

http://docs.ruckuswireless.com/fastiron/08.0.80/fastiron-08080-upgradeguide/GUID-DA75FD7E-A8D4-4B12-...

Thanks

[pavlo_pokotylo]

There may be a bug in the wrong firmware.
Maybe someone has a firmware? I would be very grateful if anyone would help.


FEX-Boot>ip addres 192.168.252.254 255.255.255.0
FEX-Boot(192.168.252.254)>boot sys tftp 192.168.252.250  SXS07202h.bin
BOOT INFO: tftp copy successful!
BOOT INFO: start with hardware reset
BOOT INFO: load monitor from tftp copied image, size = 243149
Appln_Monitor:root_task: ***local_overide = 0***
BOOT INFO: load tftp copied imageLZMA Decompression Failed Result 1 for Source Size 19 and Org Size 0

Brocade PPC filter after decompression

BOOT ERR: bad code image header
BOOT INFO: primary does not exist
BOOT INFO: secondary does not exist
FEX-Boot>

[pavlo_pokotylo]

There may be a bug in the wrong firmware.
Maybe someone has a firmware? I would be very grateful if anyone would help.


FEX-Boot>ip addres 192.168.252.254 255.255.255.0
FEX-Boot(192.168.252.254)>boot sys tftp 192.168.252.250  SXS07202h.bin
BOOT INFO: tftp copy successful!
BOOT INFO: start with hardware reset
BOOT INFO: load monitor from tftp copied image, size = 243149
Appln_Monitor:root_task: ***local_overide = 0***
BOOT INFO: load tftp copied imageLZMA Decompression Failed Result 1 for Source Size 19 and Org Size 0

Brocade PPC filter after decompression

BOOT ERR: bad code image header
BOOT INFO: primary does not exist
BOOT INFO: secondary does not exist
FEX-Boot>

[mostafahussien2]

BOOT INFO: load image from primary
BOOT ERR: bad code image header

BOOT INFO: load monitor from secondary, size = 214047
Appln_Monitor:root_task: ***local_overide = 0***
BOOT INFO: load image from secondary
BOOT ERR: bad code image header

what is the answer