DHCP server icx 7750
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-20-2018 10:36 AM
A PC can get a lease, but a iPhone or IP phone cannot get a lease.
What can be wrong?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-21-2018 10:39 AM
Is the accesspoint working ? can you access it via the controller?
regards
Martin
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-21-2018 05:13 PM
The iPhones are connected via WiFi, and the IP phones are hardwired. They will not optain an IP address. PC's get an IP address, via WiFi and hardwired.
I got a guest network on another VLAN, which has a DHCP server on a Palo Alto firewall, and the iPhone can get an IP from there.
I will find the configs.
regards
Flemming
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-08-2025 08:11 PM
I too faced the same issue today in version 08.0.95...
I created a dhcp pool in ICX7750 and then it is reached to WLC
from the Ruckus AP, the pc can get the dhcp ip address whereas the mobile phone donot receive the ip address or gets connects. both are in the same SSID.
Where as when i used the tplink router and enabled dhcp on it and when i passed it wlc both gets connected i dont know why? Anyone found the solution?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-09-2025 07:08 AM
Can you pcap and check the DORA (Discover, offer, request, ack) process? Please try 8095q and if you see unexpected behavior, feel free to open a support case.
support.ruckuswireless.com/contact-us
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-09-2025 05:13 PM - edited 01-14-2025 04:29 PM
SW version is 08.0.95pT203
I have created 2 VLANS. For example vlan 100 and vlan 101
For vlan 100 I have used the dhcp pool created on ICX7750 and For Vlan 101 I used the TP-link router to provide DHCP. Both PC+ Mobile working fine with VLAN101 in SSID101 but VLAN 100 has SSID 100 in AP on which only PC get connects.
On checking via Wireshark:
--On Laptop (Wi-Fi)
--Receives DHCP Pool Address
DHCP Request:
*Option:(50) Requested IP address (192.168.92.4)
DHCP ACK:
*Option:(54) DHCP Server Identifier(192.168.92.1)
--On Mobile (Same Wi-Fi)
--Do not lease IP address, no Request and ACK, Only Discover is seen in Wireshark
*Option:(53) DHCP Message Type (Discover)
DHCP: Discover (1)
*Option:(61) Client Identifier
Client Mac Address:<------>
*OPtion:(12) Hostname
Hostname: <Redmi-12-5G>
*option:(55) Parameter Request list
Length:12
Parameter Request List Item: (1) Subnet mask
Parameter Request List Item: (3) Router
Parameter Request List Item: (6) Domain name Server
Parameter Request List Item: (15) Domain name
Parameter Request List Item: (26) Interface MTU
Parameter Request List Item: (28) Broadcast Address
Parameter Request List Item: (51) IP Address lease time
Parameter Request List Item: (58) Renewal time value
Parameter Request List Item: (43) vendor-specific Information
Parameter Request List Item:(114) DHCP Captive-Portal
Parameter Request List Item: (108) IPv6-Only Preferred
switch configuration:
ip dhcp-server pool vlan100
excluded-address 192.168.92.1
!
excluded-address 192.168.92.100 192.168.92.254
lease 1 0 0
network 192.168.92.0 255.255.255.0
option 3 ip 192.168.92.1
deploy
ip helper-use-responder-ip
interface ve 100
vrf forwarding abc
ip address 192.168.92.1 255.255.255.0
ip helper-address 1 192.168.92.1
also globally i have enabled
ip dhcp-server enable
ip dhcp-server relay-agent-echo enable

