DHCP Relay Not working ICX 7150-48-POE L3 08.0.90e

[netwizz]

I have all the workstations at one site unable to pull an IP address from DHCP suddenly this morning and no idea why.  This is a small site running a single ICX 7150-48-POE unit with Layer-3 code for 08.0.90e.

The users are only getting 169.254.x.x APIPA IPs, which is strange because all of my other 90+ sits are doing perfectly fine.

We have NOT made any configuration changes.

Here is the VRI:

interface ve 1
 port-name Default Gateway
 ip address 10.81.0.1 255.255.0.0
 ip helper-address 1 10.1.2.3
 ip helper-address 2 10.4.5.6
!

If I do a debug of the ip dhcp relay, this is what I get.  Any ideas?



Debug: Mar  2 10:56:33 DHCP_RELAY : Relay agent rxed message on port v1
Debug: Mar  2 10:56:33 DHCP_RELAY : Received Bootp request msg on port v1
Debug: Mar  2 10:56:33 DHCP_RELAY : Bootp request packet send with GiAddr 10.81.0.1
Debug: Mar  2 10:56:33 DHCP_RELAY : Bootp request packet sent on port INVALID,With helper-address 10.1.2.3
Debug: Mar  2 10:56:33 DHCP_RELAY : Bootp request packet send with GiAddr 10.81.0.1
Debug: Mar  2 10:56:33 DHCP_RELAY : Bootp request packet sent on port INVALID,With helper-address 10.4.5.6
Debug: Mar  2 10:56:33 DHCP_RELAY :restored gi_l2_action_required: 0



Yes, DHCP is showing operational for those subnets, I can reach the LAN network, I can ping the DHCP servers from the switch, have rebooted the switch, etc.  For some reason everything works but DHCP and just for that one site.

Any ideas?