Can you confirm that I have upgraded my switch to the best and latest version possible?

[samanthacook176]

Hello -

Can you confirm that I have upgraded my switch to the best and latest version possible?

I have followed all of your steps and want to make sure that I have upgraded the switch properly so that I can avoid future issues as the switch registers as a "router" vs a switch every few months and I hate it.

Can you also please confirm how and when I'm supposed to upgrade it? How am I supposed to know when a new version is out and when it's time to upgrade it?

Please use the details below to confirm if I am now running the best possible version needed to help with all of the issues I constantly experience:

SSH@ICX7150-C12-Switch#show version

Copyright (c) Ruckus Networks, Inc. All rights reserved.

UNIT 1: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d

(28660224 bytes) from Secondary SPS08090d.bin (UFI)

SW: Version 08.0.90dT211

Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)

Compiled on Thu Apr 21 06:08:52 2022

HW: Stackable ICX7150-C12-POE

==========================================================================

UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module

Serial #:FEK3849RBF6

Software Package: BASE_SOFT_PACKAGE

Current License: 2X1G

P-ASIC 0: type B160, rev 11 Chip BCM56160_B0

==========================================================================

UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module

==========================================================================

UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module

==========================================================================

1000 MHz ARM processor ARMv7 88 MHz bus

8192 KB boot flash memory

2048 MB code flash memory

1024 MB DRAM

STACKID 1 system uptime is 2 day(s) 22 hour(s) 6 minute(s) 53 second(s)

The system started at 21:58:26 GMT+00 Fri Jan 07 2000

The system : started=warm start reloaded=by "reload"

SSH@ICX7150-C12-Switch#flash

Incomplete command.

SSH@ICX7150-C12-Switch#show flash

Stack unit 1:

NAND Type: Micron NAND 2GiB (x 1)

Compressed Pri Code size = 31457280, Version:08.0.95gT211 (SPS08095g.bin)

Compressed Sec Code size = 31457280, Version:08.0.95gT211 (SPS08095g.bin)

Compressed Pri Boot Code size = 786944, Version:10.1.24T225 (mnz10124)

Compressed Sec Boot Code size = 786944, Version:10.1.24T225 (mnz10124)

Code Flash Free Space = 1107275776

SSH@ICX7150-C12-Switch#

[syamantakomer]

Hi @samanthacook176,

Most of RUCKUS product pages in support portal give you information about the recommended version as well.

For example, for ICX7150 recommended firmware is 8095k

For more info, refer ICX7150 support page from here