cancel
Showing results for 
Search instead for 
Did you mean: 

Brocade ICX 6450 won't boot after power outage

ryan_triplett_h
New Contributor
Hello everyone,

I cannot get my switch to boot. I've tried re-flashing the uboot and the software via TFTP, which flash successfully. But but I run into errors each time I try to boot. I believe it might be completely bricked. Please assist if possible.

Log output:
Bootloader Version: 10.1.05T310 (Mar 19 2015 - 16:39:59)Unable to read Model ID - Pastebin.com
1 REPLY 1

simon_pollard
Contributor II
Hi Ryan

If it is bricked you can get it replaced as the 6450 switches have a lifetime warranty which includes advanced NBD replacement. Contact Ruckus support and open a case at support.ruckuswireless.com