Assigning IP address for Icx 8200 switches running on firmware version 10010.

[Liong]

Hi,

We have started to deploy ICX 8200 switch with firmware 10010 firmware. Previously, our switches are all ICX 7150, running on firmware 08095r. We have the question below.

1) Is the firmware 10010 router mode or switch mode? As in previous version we can differentiate by the letter R (SPR08095r) in the firmware file.

2) We have been looking everywhere for the command to assign ip to the switch, but could not get an answer. How do we assign ip to the switch, using virtual routing interface (like in 08095r)?

example:

!

vlan 200 by port
tagged ethe 1/1/1 ethe 1/1/25 to 1/1/29
untagged ethe 1/1/2
router-interface ve 200
!

!
interface ve 200
ip address 172.23.200.200 255.255.255.0
!

3) We could not find the proper document to see the list of cli changes from 0809 version to 10100 version. Could you point us to the right document?

Many Thanks!