cancel
Showing results for 
Search instead for 
Did you mean: 

AAA: UDP Listner Not Initialized, AAA not operational

kk1313
New Contributor III

I have an ICX-7850-48F running 08.0.95g ufi that will not allow RADIUS logins, only local login. Upon logging in, I receive a message stating "AAA: UDP listner not initialized, AAA not operational."

1 ACCEPTED SOLUTION

BenBeck
Moderator
Moderator

This is a known issue. Please upgrade to 8095j.

 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

View solution in original post

2 REPLIES 2

BenBeck
Moderator
Moderator

This is a known issue. Please upgrade to 8095j.

 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

MarcelG
RUCKUS Team Member

Hey There.

As Ben mentioned, this is a known defect which causes AAA authentication to fail.  It is related to this defect mentioned on the release notes for 08095h

MarcelG_0-1681924494849.png

However, I would also advise to perform an upgrade to version 08095j which was released yesterday

https://support.ruckuswireless.com/software/3648-ruckus-icx-fastiron-08-0-95j-ga-software-release-zi...

 

Regards

Carlo Marcel Guzman 
Sr Technical Support Engineer 
 
COMMSCOPE
now meets next
Support : +1-855-782-5871
Have a question or need to escalate? “Chat Now” (https://support.ruckuswireless.com/contact-us )