cancel
Showing results for 
Search instead for 
Did you mean: 

7150 no power to ap's. keeps happening after power outage.

ericjames888
New Contributor

so this is the 4th time this has happened. How can i fix this for good so it stops happening? ICX-7150-c12p. power went out at the house and then switch will not power AP. they fixed this a couple times but i do not know how to do anything on computers really. maybe its defective.

1 REPLY 1

Chandini
RUCKUS Team Member

Hi Ericjames888

Thank you for reaching us. 

Could you please let us know if you are from Lennar homes ? 

Could you please help us with the picture of front panel of the switch after connecting to a power source? 

 

Chandini_0-1684413076306.png

 

May I know how many Access Points are connected to the Switch? Could you please let me know the light status on the Access Points? Any of these lights are on (Please refer to the below picture and share a picture of the same)

 

Chandini_1-1684413076313.png

 

Also please run through the below link and check if you have access to ICX switch using console (Upload this picture as well to the portal )

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights. Also, light the status of Access Points.

Please upload the pictures using the below option in the portal. 

Chandini_2-1684413076317.png

Thanks