Solved: Re: ZoneDirector 10.1.2.0.318 (MR2 Refresh7) SNMP ... - Page 2

ETO · ‎08-05-2023

Hi.

I update my ZD1200 to latest software that I can run for my AP's 10.1.2.0.318

I found also this file in downloads https://support.ruckuswireless.com/software/2761-zonedirector-10-1-2-0-318-mr2-refresh7-snmp-mibs-zi...

How can I install this one? Or should I just unzip it?

Thank you.

Vineet_nejwala · ‎08-06-2023

Hi @ETO

These are only needed when you are using an SNMP tool to monitor certain information (snmp traps and polling). Simple Network Management Protocol (SNMP) is a set of protocols for managing networks. SNMP sends messages to different parts of a network. SNMP-compliant devices, called agents, store data about themselves in Management Information Bases (MIBs) and return this data to the SNMP requesters. Are you using SNMP ? If not you can ignore the SNMP MIB as they are of no use to you.

Below some article to help explain SNMP :

https://support.ruckuswireless.com/articles/000007319
https://support.ruckuswireless.com/articles/000004129

Best Regards

Vineet

View solution in original post

ETO · ‎08-06-2023

Hi @Vineet_nejwala

Understood. I'm not using this tool so then I will not install SNMP MIB.

Thank you for your help and all info provided.

ZoneDirector 10.1.2.0.318 (MR2 Refresh7) SNMP MIBs (ZIP)