This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
RUCKUS Self Help |   ASK the Pack
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

ZoneDirector 10.1.2.0.318 (MR2 Refresh7) SNMP MIBs (ZIP)

Go to solution
ETO
New Contributor II

‎08-05-2023 02:08 AM

Hi.

I update my ZD1200 to latest software that I can run for my AP's 10.1.2.0.318

I found also this file in downloads https://support.ruckuswireless.com/software/2761-zonedirector-10-1-2-0-318-mr2-refresh7-snmp-mibs-zi...

How can I install this one? Or should I just unzip it?

 

Thank you.

 

0 Kudos
1 ACCEPTED SOLUTION

Go to solution
Vineet_nejwala
Moderator
Moderator
In response to ETO

‎08-06-2023 05:26 AM - edited ‎08-06-2023 05:27 AM

Hi @ETO 

These are only needed when you are using an SNMP tool to monitor certain information (snmp traps and polling). Simple Network Management Protocol (SNMP) is a set of protocols for managing networks. SNMP sends messages to different parts of a network. SNMP-compliant devices, called agents, store data about themselves in Management Information Bases (MIBs) and return this data to the SNMP requesters. Are you using SNMP ? If not you can ignore the SNMP MIB as they are of no use to you.

Below some article to help explain SNMP :

https://support.ruckuswireless.com/articles/000007319
https://support.ruckuswireless.com/articles/000004129

Best Regards

Vineet

View solution in original post

0 Kudos
5 REPLIES 5

Go to solution
ETO
New Contributor II

‎08-06-2023 09:57 PM

Hi @Vineet_nejwala 

Understood. I'm not using this tool so then I will not install SNMP MIB.

 

Thank you for your help and all info provided.

 

0 Kudos
Copyright © 2024 Khoros, LLC