ZD3000 and Cisco 3750 Trunk port with native vlan question

[zaur_nedashkovs]

Hello Ruckus Community!

I have typical network topology ISPROUTERL3_SWITCHL2_SWITCHES
L3_SWITCH = WS-C3750X-24S-S does Inter-vlan routing.
My Ruckus ZD3000 is directly connected to L3_SWITCH
ZF Access Points are connected to L2_SWITCHES = WS-C2960S-48FPS-L

Lets say i have 3 VLANs:

254 - IT_MANAGEMENT
10 - WIRELESS_GUEST
11 - WIRELESS_STAFF

I would like to configure port as trunk with allowed vlan 10,11 and native vlan 254 on L3_SWITCHZD3000

trunk with allowed vlan 10,11 and native vlan 254 on L2_SWITCHESZF AP`s

The idea is to manage ZF`s via ZD3000 trough vlan 254 and send regular "user" traffic over vlans 10 and 11.

As of right now when i do trunk with allowed vlan 10,11 and native vlan 254 on L3_SWITCHZD3000 - i and not getting any connection to ZD3000. only if cisco`s port is in access "mode".

Thanks,
Zaur.

[rahul_koul]

Hi Zaur,

I think you are not able to access the ZD WebUI from your laptop is what you mean when you say "not getting any connection to ZD 3000". Am I correct? Also, I believe that APs are able to connect to the ZD..right?

[zaur_nedashkovs]

No, i mean that ZD is not accepting any traffic from NATIVE VLAN 254

[rahul_koul]

so are the APs even unable to join the ZD?

[zaur_nedashkovs]

Correct.

I will post port configurations on Switches tomorrow.