cancel
Showing results for 
Search instead for 
Did you mean: 

Where do you reboot your SmartZone 100 sz100?

brian_koomen
New Contributor III

I have been all over the interface and still cannot locate a place where you can click on a button that will reboot the smartzone 100.

SZ100 firmware is: 3.5.0.0.832

Thought it used to be under the user icon at the top right of the screen, but it's not there anymore.

I can always yank the power cord out but did not want to do that.

Any help would be appreciated.

12 REPLIES 12

michael_brado
Esteemed Contributor II
The CLI command is "reload".

brian_koomen
New Contributor III

No GUI option to reboot/reload the unit?


Are you telling me the only way to reboot the SZ100 is through the CLI?

michael_brado
Esteemed Contributor II
There is also a hardware on/off switch, next to where you would yank out the power cord to reboot it.

mitchell_axtell
Contributor II
It's in the cluster menu- System > Cluster > Click on the controller > Restart just above.