Is a ZD1200 compatible with a ZF7782 AP

[julian_schaffaf]

I wanted to ask if it is possible to use a ZD1200 with a ZF7782 Ap ? And if so, what firmware could run on both devices? 🙂

[fumblingfrost]

Hello. I have the same questions. Did you resolve it?

krunker

[syamantakomer]

Hi there,

Solution is already provided for this thread. Please use the solution given or start a new thread if solution is not working for you. This will help the community members to track the post separately. 

[syamantakomer]

Hi Julian,

• ZoneFlex 7782, Dual band outdoor 802.11n 3x3:3 access point, omni-directional coverage (replacement = ZoneFlex T710)
• ZoneFlex 7782-N, Dual band outdoor 802.11n 3x3:3 access point, narrow sector coverage (direct replacement not planned, suggested ZoneFlex T301n)
• ZoneFlex 7782-S, Dual band outdoor 802.11n 3x3:3 access point, 120-degree sector coverage (replacement = ZoneFlex T710s)
• ZoneFlex 7782-E, Dual band outdoor 802.11n 3x3:3 access point, external antenna (replacement not planned, suggested ZoneFlex T300e)

Please refer the EOS announcement document for more information.

https://support.ruckuswireless.com/documents/1065-zoneflex-7782-7782-n-7782-e-7782-s-end-of-sales-pr...

[julian_schaffaf]

Sorry for so many Questions 😄

In your opinion, would it work in an existing network of 7782 Ap ́s if you extended this and used the T310s Ap for the extension? Starting point is the ZD1200,

and if I use the  10.1.2.0.318 Firmware version it should work with the "old and new" AP´s or did i miss something ? ^^

I would like to hear your opinion about this if it is okay for you 😄 

[syamantakomer]

@julian_schaffaff as a best practice, always read release notes of any specific version and it will have most of the answers there.

Please refer the release notes from the below link, it has supported, unsupported AP list and other information about this release.

https://support.ruckuswireless.com/documents/3532-zonedirector-10-1-2-mr2-refresh7-release-notes/dow...