RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
04-17-2024 10:52 AM
Hello,
Recently we've seen some real slow downs on our network. It turns out according to the netgear the ruckus APs are attached to something similar to a DDOS attack is occuring on the ports connected to our APs.
Is there a way to find the mac address on the Ruckus units that is causing the issue so we can block it?
04-18-2024 11:06 PM
Dear @bdillard ,
Best source, is to do a packet capture on wired or wireless interface and you should be able to find the source of DDOS attack.
Regards,
Abilash
04-25-2024 06:29 PM
Thanks, all of these locations are remote so it will take a while to get it set up (plus I need to brush up on my Spanish for one of them)
05-05-2025 02:14 AM - edited 05-07-2025 02:54 AM
I had a similar issue and found out it was caused by traffic generated through a Stresser tool aimed at random ports on my network. What helped was setting stricter firewall rules and temporarily geoblocking countries I don't interact with. Also noticed my logs filled up fast, so I set automated log rotation to keep things running smoother.
