zf7372 will not connect to ZD1100

[skelton_family]

Initial setup with a ZD1100, 7372, and 7762. For some reason, the 7372's connection request is rejected, thus I cannot add or configure short of the web server login for the AP.

What might I be doing wrong?

Log message re: connection rejection are listed below:
============================================

2013/11/02 12:03:04 Medium Model[zf7372] is not supported; connection request from AP[54:3d:37:2c:a6:e0] refused
2013/11/02 12:02:59 Medium Model[zf7372] is not supported; connection request from AP[54:3d:37:2c:a6:e0] refused
2013/11/02 12:02:54 Medium Model[zf7372] is not supported; connection request from AP[54:3d:37:2c:a6:e0] refused
2013/11/02 12:02:03 Medium Model[zf7372] is not supported; connection request from AP[54:3d:37:2c:a6:e0] refused
2013/11/02 12:01:58 Medium Model[zf7372] is not supported; connection request from AP[54:3d:37:2c:a6:e0] refused
2013/11/02 12:01:53 Medium Model[zf7372] is not supported; connection request from AP[54:3d:37:2c:a6:e0] refused
2013/11/02 12:01:06 Medium Model[zf7372] is not supported; connection request from AP[54:3d:37:2c:a6:e0] refused
2013/11/02 12:01:01 Medium Model[zf7372] is not supported; connection request from AP[54:3d:37:2c:a6:e0] refused
2013/11/02 12:00:56 Medium Model[zf7372] is not supported; connection request from AP[54:3d:37:2c:a6:e0] refused

[sue_ellingson]

Keith - we have a new installation of zd1125 and 7372 AP's that came running 9.5.1.0.50. Seems to work, but I'm looking into upgrading per an email that was sent out that's recommending 9.5.3.0.44.

Should I just go to 9.6.1? I'm a big fan of "if it ain't broke, don't fix it".

[keith_redfield]

I am as well, but both of those versions offer better performance. I myself would do 9.5.3 now and then 9.6.2 when it is released in a few weeks.