upgrade firmware ZF 7055

[Roy]

Hey guys.
Good morning, everyone.
I need to update the firmware on the ZF7055 AP, but when I try to do so, I get the following message: “Upgrade/Downgrade from FSI to UI is not allowed.” Can anyone help me with this? I'm new to this, but I'm interested in learning so I can help others in the future.

The current firmware on my AP is
Software Version: 3.6.1.0.354

Best regards and thanks.

[ms264556 · Accepted solution]

Your AP is running fully signed SmartZone firmware. Assuming you want to revert to Solo firmware, you need full or intermediate signed (so 104 or higher). This solo firmware is intermediate signed, and will install ok-: https://support.ruckuswireless.com/software/1017-zoneflex-solo-access-point-104-0-0-0-1347-ga-softwa...

[Roy]

Hi my Friend.
I did the update as you mentioned and at the beginning I got an error, I had to reset the AP manually once again, I did the process again and now it ran correctly. Thank you very much for your support. Regards.