convert unleashed ruckus r610 to standalone ap

[alan_tam_ell5st]

Hi,

    I will like to convert ruckus R610 to standalone AP that can managed by Zone director 1200 with firmware 9.13.3.0 build 41. What is the firmware that I need to download?

    Thanks.

alan

[DarrelRhodes]

Hi Alan,

You need the standalone firmware, download it from our support site here: https://support.ruckuswireless.com/software/1727-zoneflex-solo-access-point-110-0-0-0-663-ga-softwar...

Once the AP is connected to a ZoneDirector, it will be given another new ZD-specific firmware image by the ZD.

I'd recommend factory-resetting the AP after you've changed the firmware image.

Hope that helps,
Darrel.

[asifashfaq]

any one there

[alan_tam_ell5st]

Thanks a lot for your value information. I will try to download the firmware that you mention.Is the any different between indoor ap software and solo access point software.

Thanks again.

Alan

[DarrelRhodes]

Hi Alan,

All APs, whether indoor or outdoor have their own, specific, firmware version for each of our software platforms: SmartZone, Unleashed, ZoneDirector and Stand-Alone.

Thanks,
Darrel.