RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

Resetting ZoneDirector factory defaults - will I loose AP's?

I'm in need of resetting my ZoneDirector to factory defaults, my 6 7352 APs are managed via ZD, will I loose their configuration or will they auto-discover when I reboot and set up ZD again?

ESSID with time schedule doesn't respect the schedule

I have defined a ESSID with a time schedule ( it should be active between 06:00 up to 24:00) but somehow it's getting active at 05:00 and suspends at 23:00 o'clock. I have checked the system clock on both primary and secondary ZD (3050 model) and th...

PHY Errors, Noise Floor, Airtime interpretation in ZD

I would like to find out what values for PHY Errors, Noice Floor, Airtime total, busy, RX, TX are good and what values are bad? If I'm correctly informed, this is what I know: PHI Errors of < 20000 is acceptable, Noise Floor above -85 is bad, bel...

1100 auto config wont see aps

we have ZD 1100 set to auto detect but it does not see them

Please recommend a wireless ap (50 people at the same time use)

Now that works well as a wired lan server. However, using a wireless ap About 50 people at the same time the user is 2.5Mbit /s used for watching movies at try (image will be somewhat buffered.) The actual max speed 100Mbit/ s will must become...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

1

1