There is a big problem on the Sw version of controller from 9.6 to 9.7.2.0.15 upgrade on the AP's 2741 and 2942. It causes to destroy complately on the AP's. Destroyed AP's never returns to default IP in case of Hard reset. One customer ordered addi...
Greetings! Recently acquired a ZF7982, factory reset it, and am using it as a standalone ap. It is currently running the most recent FW: 9.6.1.0.15 If I set up a 2.4 or 5 ghz network, give it a name, change some settings, then enable wpa2, psk, ae...
I'm getting complaints that AP's (7352) are making noise when data is being transmitted. Sounds like a rapid ticking noise. Some AP's are mounted in bedrooms so it can be disturbing at night time. Anyone else experimce this?
Hi, It's possible configure the access point with enterprise authentication (802.1x/Radius) without using a Zone Director? I'm thinking buy a R300 Access Point. Ty.
I have a 7363 AP and an ASA 5505 connected to a Comcast Business Broadband Modem. 15 x IOS devices 6 x wired devices 6 x WVC54GCA Cameras Pretty sure 'best recommended' would be a VLAN on AP for cameras, yes? Currently have one wlan with everyth...
