ZF7762-S doesn't connect to the ZoneDirector 1200

[ruzanna_zohraby]

Hello dear colleagues,
I have a ZF7762 with firmware version 9.7.0.0.220 and Ruckus Wireless ZoneDirector ZD1200 with firmware version 9.13.3.0 build 133.
I have a problem with connecting AP to the ZD1200, it even doesn't trying to join. From CLI ap-mode gets "AP is in Stand-Alone mode" output.
Is there any specific configuration to make for connecting to the ZD1200?

Thanks in advance!!

[jakob_peterh_ns]

ZF7762 is not supported on FW 9.13... 
https://ruckus-support.s3.amazonaws.com/private/documents/1218/ZD_9_13_2_Release_Notes_RevA_20161110...

So that is not gonna work.

[ruzanna_zohraby]

Thank you Jakob for fast response!
So if I'll downgrade ZoneDirectory firmware version I can connect my AP to this ZoneDIrectory?

[jakob_peterh_ns]

Yes, I will assume so, but what latest version supports the 7762, I'm not sure.
You will have to go through the Release Notes.

[paul_van_der_cr]

to be sure that the AP is trying to connect to the controller, use this command at the cli: set director ip x.x.x.x (x.x.x.x is the ipaddress of the controller), then you could check in the logfiles that the AP is trying to connect, but if the AP is not supported... then there is no chance to use that combination of AP and controller