Hello,
Have 3 x IP Cameras connected to a ZF7731 bridge connection of around 600m, distance in the config is set to 1Km.
I ran the Channel Optimizer during initial setup and SmartSelect is enabled on Root bridge.
Performance was excellent during initial days but then the client started to complain that the connection was intermittent and they are loosing video at different times.
Channel Optimizer was re ran again and we checked the system for more than an hour with not a single issue.. but then 3 days after that, the client called back and said that the connection is still dropping at sporadic times.
Is it possible to check from ZF7731 old logs about interference?
Any other thoughts or ideas are much appreciated.
Thanks,
Hisham
