Upgrading single R510 from Unleashed to standalone issue

[Anonymous]

Hi Experts,

I have one R510 AP and I want converted to standalone mode, I have reset it and connected via 192.168.0.1 on internet explorer and tried to upgraded from local but for the moment I face with this message and doesn't let me to upgrade from local

and I have also tried to upgrade online but again I face with this message: 

Do you have any ideas or solution? 

The AP current firmware is: 200.7.10.202.94

Thank you for sharing your experiences,

Best

Ghasem

[syamantakomer]

Hi @ghasem_ashjaei ,

Try to upgrade from controller prompt and not ap-mode, see how it goes.

Using TFTP

ruckus> en
ruckus#
ruckus# debug

ruckus(debug)# fw_upgrade -p tftp  -s 192.168.2.1  -n AP_firmware_filename.img

Using FTP

ruckus(debug)# fw_upgrade -p ftp -s username:[email protected] -n AP_firmware_filename.img

[Anonymous]

@syamantak_omer 

Thank you for your comment, 

I tried these command and still no luck,

ruckus(debug)# apfw_upgrade -p ftp -s admin1:[email protected] -n 1.bl7
------------------------------------------------------------------------
 ** Starting CLI Upgrade  **
------------------------------------------------------------------------
        Protocol  : ftp
        URL       : ftp://admin1:[email protected]/1.bl7
----->Ruckus Wireless suggest you go to backup ZD setteings first
----->y: contintue upgrade; n: leave here to excute bakup command <save-config> ;
----->Please select one from above
      [y|n] enter>------------------------------------------------------------------------
 ** Checking if memory is sufficient **
------------------------------------------------------------------------
.
----->Sufficient memory to perform upgrade
------------------------------------------------------------------------
 ** Downloading AP patch image **
------------------------------------------------------------------------

----->Downloading image failed (code:6)
        Please check your network connection
        as well as ftp server, and try again
------------------------------------------------------------------------
 ** Upgrade failed, please try again **
------------------------------------------------------------------------
apfw_upgrade "-p" "ftp" "-s" "admin1:[email protected]" "-n" "1.bl7"
ruckus(debug)#

I have also tried this command:

ruckus(debug)#apfw_upgrade  ftp://192.168.0.4/1.bl7

[Anonymous]

Hi syamantak_omer 

Can you please let me know which Firmware should be download for changing unleashed to standalone ?? 

Tnx 

Ghasem

[Anonymous]

This is my control info

I want to connect one single R510 AP to this controller 

[Ratnadeep]

@ghasem_ashjaei

Hi Ghasem,

R510 AP is compatible with the above version ( 6.0.0.0.1331) and any Standalone version of R510 is compatible.

If the commands are still not working, I would request you to please create a case with us and one of our Engineers will help you to upgrade the AP to a standalone version, and connect the AP to the controller.