cancel
Showing results for 
Search instead for 
Did you mean: 

Setting up a L2/MAC access control

bdillard
Contributor II

Hello,

I have a bunch of 550's - no zone director, not ruckus firewall - just an unleashed network - latest version firmware.

I had set up a mac address restriction a long time ago and forgot the steps.    I have the mac address of every phone, laptop and ipad we will allow on the network.

I went to Services, access control, L2/Mac Address and input the mac address for a test unit.  I set it for only allow the stations listed below.

I wennt to device access policy and created a policy that says deny all by default.

I don't know the next steps because currently everything still works.

 

 

1 ACCEPTED SOLUTION

bdillard
Contributor II

Please disregard - I believe the person testing, tested before the rule was in place.   I think it is working fine.

View solution in original post

2 REPLIES 2

bdillard
Contributor II

Please disregard - I believe the person testing, tested before the rule was in place.   I think it is working fine.

Hello @bdillard,

Glad to know that it is working fine.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI

RUCKUS Networks, CommScope!

Follow me on LinkedIn