Does anyone have a recommendation for what software version to use in a controller based enviroment on R500 access-points? In our test enviroment we are running Software Version::126.96.36.199.593 for our Ruckus R500 Access Points. Any surgestions?
I am running a vSZ - Virtual Smart Zone Controller (Image:vscg-188.8.131.52.790) and this controller will controll/power many R500 access-points, and I wonder if there is a recommended software version to put on the controller for the R500 access-points?
Hello, for my experience all firmware versions work fine for cSZ, by far the most important is vSZ configuration (allowed channels, scanning mode, allowed rates) -- it may be crucial to get compatibility with real wi-fi client mix.
We worked with all firmaware versions bundled with vSZ releases from 3.0 to 3.2, and there was no problems with firmware at all.
Hope it helps...