Recommended/Stabel software for R500

[harald_l_ken]

Does anyone have a recommendation for what software version to use in a controller based enviroment on R500 access-points?
In our test enviroment we are running Software Version::3.2.0.0.593 for our Ruckus R500 Access Points. Any surgestions?

[monnat_systems]

i think you meant recommended software version on Ruckus Vscg powered cloud controller for R500. correct?
Because Software Version::3.2.0.0.593 is of Ruckus vSCG

[harald_l_ken]

I am running a vSZ - Virtual Smart Zone Controller (Image:vscg-3.2.0.0.790) and this controller will controll/power many R500 access-points, and I wonder if there is a recommended software version to put on the controller for the R500 access-points? 

[eizens_putnins]

Hello, for my experience all firmware versions work fine for cSZ, by far the most important is vSZ configuration (allowed channels, scanning mode, allowed rates) -- it may be crucial to get compatibility with real wi-fi client mix. We worked with all firmaware versions bundled with vSZ releases from 3.0 to 3.2, and there was no problems with firmware at all. Hope it helps...

[harald_l_ken]

Thanks for your reply and advice!