cancel
Showing results for 
Search instead for 
Did you mean: 

Successful L2TP Endpoint

jason_pearcy
New Contributor III
Any recomend an L2TP server that will work with ruckus 9.7 APs? I have tried a couple and constantly in the logs of the AP I see that there are different protocols being used that the AP rejects.

Unsupported protocol 'Internet Protocol Control Protocol' (0x8021) received

Unsupported protocol 'Compression Control Protocol' (0x80fd) received
6 REPLIES 6

keith_redfield
Valued Contributor II
Hi Jason,

Our AP's use a proprietary tunnel handshake. You'll only be able to terminate to a ZD. If you need connectivity across a public WAN, you'll need to provide the tunnel.

jason_pearcy
New Contributor III
Standalone AP managed by flexmaster. I read in a setup guide about using L2tp for management traffic. Not ZD communication.

keith_redfield
Valued Contributor II
It's the same deal - you can connect to FlexMaster but not another L2TP device. You can either tunnel as above, or expose the FM server. See https://support.ruckuswireless.com/an...

jason_pearcy
New Contributor III
I think we are talking about different things at this point. Thanks for the help.
Labels