PC is statically set to be on 192.168.0.0/24 (picked 192.168.0.4)
- Have hard reset multiple times (have tried holding for more than 30 seconds, have tried 10 seconds) - Only one R710 unit, no other ruckus access points on network/in facility - Can continuously ping 192.168.0.1 - Can't ssh into 192.168.0.1 - Can't connect to 192.168.0.1 or unleashed.ruckuswireless.com through multiple web browsers - PWR LED flashes green, CTL LED flashes green at about 2 second intervals, no other LEDs on - Can't connect to "Configure-me.xxxxx" address using an iPhone (and therefore configure through the Unleashed app). - Did a port scan on 192.168.0.0/24 and it found all ports were closed on the access point (correct MAC address for the access point showed up and it was 192.168.0.1).
Discovered open port 53/tcp on 192.168.0.1 Discovered open port 9999/tcp on 192.168.0.1 Discovered open port 18301/tcp on 192.168.0.1 Discovered open port 1883/tcp on 192.168.0.1 Discovered open port 8099/tcp on 192.168.0.1
Tried to SSH and also used web browser (Chrome) to try each port, no prompt or message seen. I have factory reset several times.
So, is there anyway to fix this? Can I put Standalone or fresh version of Unleashed on it using the USB port? Can you upgrade the firmware using the USB?