01-22-2022 11:16 AM
iam running a mesh with 3 R510 AP with Unleashed Firmware 188.8.131.52.195.
There should be an AP-Group Option for configuring 11n only Mode.
But there is no such Option. This one is missing.
01-23-2022 04:16 AM
it seems that this option can still be configured through cli.
ap-group System Default
radio 2.4 11n-only N-only
radio 5 11n-only N-only
01-24-2022 01:39 AM
I believe the '11n only mode' feature has returned to the GUI in Unleashed version 200.12. The screenshot on page 267 of the 200.12 UG shows the feature in the AP group config, as prior to 200.11.
I hope that helps,
01-24-2022 02:13 AM
sorry - but the feature is not available in the gui. i have installed 184.108.40.206.234.
01-24-2022 05:40 AM
@daniel_hainich Thanks for letting me know Daniel, I've just confirmed this myself also.
I'm raising this internally and will let you know of any updates.
01-26-2022 11:43 AM
@darrel_rhodes please keep me in loop as well.