01-22-2022 11:16 AM
iam running a mesh with 3 R510 AP with Unleashed Firmware 188.8.131.52.195.
There should be an AP-Group Option for configuring 11n only Mode.
But there is no such Option. This one is missing.
01-22-2022 01:15 PM
01-24-2022 08:01 AM
@daniel_hainich I had the same issue on my unleashed network at home. OFDM-Only, but my wifi printer remained attached at b. I had to go in and make changes to the printer (Ad-Hoc mode was enabled) and that cleared it. Be sure to check the client as well.
04-21-2022 04:15 PM
This is likely a UI bug as 802.11b does not support OFDM. It was more likely actually connected using g or n standards.
01-22-2022 01:43 PM
It's enabled alright... Is this client 11b only? Are you sure it's not connecting with 11g? I'm not an Unleashed user so we might need some help from one of the Ruckus guys. They're pretty good about chiming in.
01-22-2022 11:56 PM