New R710 deployment problems with HP Switches entering POE+ 802.3at mode

[josh_hymer]

All of our ruckus APs (R710s) are in 802.3af mode.  Every AP is connected to a POE+ port on our 5412zl switches (Capable of 37 watts per port).  In CLI on our ZD3000 we have set the lldp enable in the System Default group.  Anyone else seeing this issue?  Thank you!

[sergiy_oliynyk]

On HP-2920 LLDP is enabled by default... For the rest on config i used this KB:
https://www.juniper.net/techpubs/en_US/release-independent/nce/information-products/pathway-pages/nc...