cancel
Showing results for 
Search instead for 
Did you mean: 

New R710 deployment problems with HP Switches entering POE+ 802.3at mode

josh_hymer
New Contributor III
All of our ruckus APs (R710s) are in 802.3af mode.  Every AP is connected to a POE+ port on our 5412zl switches (Capable of 37 watts per port).  In CLI on our ZD3000 we have set the lldp enable in the System Default group.  Anyone else seeing this issue?  Thank you!
5 REPLIES 5

sergiy_oliynyk
New Contributor II
Check POE limits on HP, worked for my R710's:Image_ images_messages_5f91c41d135b77e24796c9ab_15a304e90c87c53b173dac6a4989be14_RackMultipart2015110912795w7c0-0d004dbd-c16e-4964-83ed-049cecd19bde-808326172.JPG1447096087

michael_brado
Esteemed Contributor II
Is LLDP also configured on the switch ports?

https://support.ruckuswireless.com/answers/000005005

Why cant knowledge articles make it in to the manuals 🙂

Does not work with Cisco SG300 switches. I heard today that there is an AP Command to force 802.3at request from AP.

Stay tuned