cancel
Showing results for 
Search instead for 
Did you mean: 

M510 LTE CLI

juergent
New Contributor II
Firstly, the M510 seems to be a great product. However, the LTE Status M510 information via WebUI is insufficient as it contains no information (apart from connection information). My questins is on how I can retrieve more information about the current LTE status (RSSI etc etc) via CLI?

I could not find any documentation 

Regards,
Juergen
8 REPLIES 8

michael_brado
Esteemed Contributor II
I don't see a published command reference guide, so you might look around from the AP CLI, and Help command output.

Ankush_Chandan
Contributor II
Hi Juergen,

Please use get lte-statistics command from the AP CLI.

Here is a sample output of this CLI and will provide you detailed statistics:

rkscli: get lte-statistics

LTE CHIP                 = EC25-A

LTE FW VERSION           = EC25AFAR05A04M4G - SubEdition: V06

TIME OF DAY              = 19/05/05,18:17:53-28

GPS STATUS               = enabled

IMEI NUMBER              = XXXXXXXXXXXXXX

SIM SELECTION            = auto

SIM 0                    = present (active)

SIM 0 MCC                = 310

SIM 0 MNC                = 410

SIM 0 APN                = nxtgenphone

SIM 0 IMSI               = XXXXXXXXXXXXXXXXXXX

SIM 0 ICCID              = XXXXXXXXXXXXXXXXXX

SIM 0 ROAMING            = enabled

SIM 0 USERNAME           = -

SIM 0 PASSWORD           = -

SIM 0 PINCODE            = -

SIM 0 TX                 = 49.45 KB

SIM 0 RX                 = 139.28 KB

SIM 0 NW REG             = registered, home network

SIM 0 RSSI               = -63 dBm (excellent)



SIM 0 GW                 = 10.x.x.14

SIM 0 DNS                = 172.26.38.1

SIM 0 IP                 = 10.x.x.13

SIM 0 MASK               = 255.255.255.252

SIM 0 OPERATOR           = AT&T

SIM 0 MODE               = 4G

SIM 0 NW TYPE            = FDD LTE

SIM 0 BAND               = LTE BAND 2

SIM 0 CHANNEL            = 800

SIM 1                    = not present (inactive)

SIM 1 MCC                = 0

SIM 1 MNC                = 0

SIM 1 APN                = defaultapn

SIM 1 IMSI               =

SIM 1 ICCID              =

SIM 1 ROAMING            = enabled

SIM 1 USERNAME           = -

SIM 1 PASSWORD           = -

SIM 1 PINCODE            = -

SIM 1 TX                 = 0.00 bytes

SIM 1 RX                 = 0.00 bytes

SIM 0 switch count       = 0

SIM 0 nw lost count      = 0

SIM 0 card removal count = 0

SIM 0 dhcp timeout count = 0

SIM 0 transmit           = 49.45 KB

SIM 0 receive            = 139.28 KB

SIM 1 switch count       = 0

SIM 1 nw lost count      = 0

SIM 1 card removal count = 0

SIM 1 dhcp timeout count = 0

SIM 1 transmit           = 0.00 bytes

SIM 1 receive            = 0.00 bytes

OK



Regards,
-Ankush

juergent
New Contributor II
Thanks Ankush,

I am fairly new to the RUCKUS CLI and having trouble to get the AP to provide the statitics via "get lte-statistics"  - see below.


ruckus(debug)# get lte-statistics
The command is either unrecognized or incomplete. To view a list of commands that you can run  from this context, type '?' or 'help'.


What am I doing wrong here?

Regards,
Juergen

timothy_kamps
New Contributor III
I am testing one of the M510 for a client but I don't seem to be able to get any internet on it running standalone.

When I run the command I don't get any output for the current IP, Mask, Gateway, Operator, or DNS.

ATT tells me the IMEI is valid and the new SIM card I got from them show present and is the same as the one they list in their system.

Is there any other way to troubleshoot the LTE connection beyond this one command?

I don't see any other documentation on it.

I want to use this in a remote location factory where they have satellite internet and I would like to have the M510 provide backup internet in case the satellite goes down.

I have previously used a Sierra Wireless ES450 for this purpose. The APs at this location are connected to vSZ.

Thanks!Tim

rkscli: get lte-statistics-------------------------------------------------------
LTE Statistics:

LTE INTERFACE : wwan0 
LTE Chip : EC25-A
LTE FW Version : EC25A_FAR05A04M4G - SubEdition: V06
IMEI :XXXXXXXXXXXXXXXXXX
GPS Status : Enabled
SIM Selection : auto
Radio connection : Not Connected
Active SIM : SIM 0
IP : 
Mask : 
GW : 
Operator : -
DNS : 
Current Channel : 0
Access Technology : -
Band : -
Mode : 
RSSI : -65 dBm (excellent)
Roaming Status : not registered, searching
Country Name : USA
LTE link uptime : 0 hrs, 0 minutes, 0 seconds
SIM 0 Present : YES
SIM 0 IMSI : XXXXXXXXXXXXXXXXX
SIM 0 ICCID : XXXXXXXXXXXXXXXX
SIM 0 MCC : 310
SIM 0 MNC : 410
SIM 0 APN : nxtgenphone
SIM 0 User Name : -
SIM 0 Password : -
SIM 0 Authentication : NONE
SIM 0 Pin Code : -
SIM 0 Tx Bytes : 1152
SIM 0 Rx Bytes : 0
SIM 0 Switch Count : 0
SIM 0 Nw Lost Count : 0
SIM 0 DHCP Timeout Count : 1
SIM 0 Card Removal Count : 0
SIM 1 Present : NO
SIM 1 IMSI : 
SIM 1 ICCID : 
SIM 1 MCC : 0
SIM 1 MNC : 0
SIM 1 APN : defaultapn
SIM 1 User Name : -
SIM 1 Password : -
SIM 1 Authentication : NONE
SIM 1 Pin Code : -
SIM 1 Tx Bytes : 0
SIM 1 Rx Bytes : 0
SIM 1 Switch Count : 0
SIM 1 Nw Lost Count : 0
SIM 1 DHCP Timeout Count : 0
SIM 1 Card Removal Count : 0


Labels