Ruckus Unleashed R320 - AP's trying to become Master and rebooting every 5 minutes

[shahzad_ali_igp]

I have 3x Ruckus Unleashed AP R320 connected to a Cisco POE Switch and a Wifi Router.

AP's get IP from the Wifi Router's DHCP 

I updated the firmware two days ago and since then the the members AP's are trying to become Master AP and reboot every five minutes. 

Things I have tried and did not work for me:

Factory reset
Restarted the POE switch
Assigned priority to master 


I think the Member AP loses connection with Master AP and tries to become a Master and then finds the Master and reboots and this cycle keeps going on..

Any thoughts?

See logs below:

Jun  5 09:14:50 1AP syslog: eventd_to_syslog():Radio [2.4G] of AP[2AP@28:b3:71:0f:0a:20] is ON 
Jun  5 09:14:50 1AP syslog: eventd_to_syslog():Radio [5G] of AP[2AP@28:b3:71:0f:0a:20] is ON 
Jun  5 09:15:08 1AP syslog: eventd_to_syslog():Radio [2.4G] of AP[SFAP@28:b3:71:0f:15:b0] is ON 
Jun  5 09:15:09 1AP syslog: eventd_to_syslog():Radio [5G] of AP[SFAP@28:b3:71:0f:15:b0] is ON 
Jun  5 09:16:59 1AP syslog: eventd_to_syslog():AP[SFAP@28:b3:71:0f:15:b0] joins with uptime [68] s and last disconnected reason [AP Restart : application reboot] 
Jun  5 09:17:01 1AP stamgr: stamgr_update_reboot_info():AP[28:b3:71:0f:15:b0] reboot detail:/usr/sbin/election  election: The unleashed network have another master and the priority is less than it, reboot.  
Jun  5 09:17:01 1AP syslog: eventd_to_syslog():AP[SFAP@28:b3:71:0f:15:b0] warm boot successfully,last reboot reason [application reboot]. 
Jun  5 09:18:02 1AP syslog: eventd_to_syslog():Radio [2.4G] of AP[SFAP@28:b3:71:0f:15:b0] is ON 
Jun  5 09:18:03 1AP syslog: eventd_to_syslog():Radio [5G] of AP[SFAP@28:b3:71:0f:15:b0] is ON 
Jun  5 09:22:25 1AP syslog: eventd_to_syslog():AP[SFAP@28:b3:71:0f:15:b0] joins with uptime [71] s and last disconnected reason [AP Restart : application reboot] 
Jun  5 09:22:26 1AP stamgr: stamgr_update_reboot_info():AP[28:b3:71:0f:15:b0] reboot detail:/usr/sbin/election  election: The unleashed network have another master and the priority is less than it, reboot.  
Jun  5 09:22:26 1AP syslog: eventd_to_syslog():AP[SFAP@28:b3:71:0f:15:b0] warm boot successfully,last reboot reason [application reboot]. 
Jun  5 09:23:28 1AP syslog: eventd_to_syslog():Radio [2.4G] of AP[SFAP@28:b3:71:0f:15:b0] is ON 
Jun  5 09:23:28 1AP syslog: eventd_to_syslog():Radio [5G] of AP[SFAP@28:b3:71:0f:15:b0] is ON 
Jun  5 09:26:37 1AP syslog: eventd_to_syslog():AP[SFAP@28:b3:71:0f:15:b0] joins with uptime [70] s and last disconnected reason [AP Restart : power cycle] 
Jun  5 09:26:39 1AP syslog: eventd_to_syslog():AP[SFAP@28:b3:71:0f:15:b0] cold boot successfully 
Jun  5 09:27:40 1AP syslog: eventd_to_syslog():Radio [2.4G] of AP[SFAP@28:b3:71:0f:15:b0] is ON 
Jun  5 09:27:40 1AP syslog: eventd_to_syslog():Radio [5G] of AP[SFAP@28:b3:71:0f:15:b0] is ON 
Jun  5 09:31:02 1AP syslog: eventd_to_syslog():AP[SFAP@28:b3:71:0f:15:b0] joins with uptime [86] s and last disconnected reason [AP Restart : application reboot] 
Jun  5 09:31:04 1AP stamgr: stamgr_update_reboot_info():AP[28:b3:71:0f:15:b0] reboot detail:/usr/sbin/election  election: The unleashed network have another master and the priority is less than it, reboot.  
Jun  5 09:31:04 1AP syslog: eventd_to_syslog():AP[SFAP@28:b3:71:0f:15:b0] warm boot successfully,last reboot reason [application reboot]. 
Jun  5 09:32:06 1AP syslog: eventd_to_syslog():Radio [2.4G] of AP[SFAP@28:b3:71:0f:15:b0] is ON 
Jun  5 09:32:06 1AP syslog: eventd_to_syslog():Radio [5G] of AP[SFAP@28:b3:71:0f:15:b0] is ON 
Jun  5 09:35:43 1AP syslog: eventd_to_syslog():AP[3AP@28:b3:71:0f:15:b0] joins with uptime [101] s and last disconnected reason [AP Restart : application reboot] 
Jun  5 09:35:44 1AP stamgr: stamgr_update_reboot_info():AP[28:b3:71:0f:15:b0] reboot detail:/usr/sbin/election  election: The unleashed network have another master and the priority is less than it, reboot.  
Jun  5 09:35:44 1AP syslog: eventd_to_syslog():AP[3AP@28:b3:71:0f:15:b0] warm boot successfully,last reboot reason [application reboot]. 

[deject_masetrse]

Hi,The master AP want to upgrade the firmware of member automatically but not succeed you should upgrade the firmware of 3 AP by manually.

[shahzad_ali_igp]

Just upgraded manually - rebuild the unleash network. Fingers crossed.

[deject_masetrse]

Hi,I think that you have 2 AP with master firmware.you should find the another master AP and change it .
It's Better run your network with 2 AP and step by step add new AP for find problem...