I'm configuring an R720, going through the initial setup. I factory reset the device and I can ping the default IP 192.168.0.1, however I cannot access it via the web or through SSH. There's a strong possibility that this device was once configured with a ZoneDirector, I've read that might be the problem. I'm new to Rukus and I just want to know if there's anything I can do in this situation without going through ZoneDirector, which I've never used before.
if you set your AP to factory default you can SSH into it via default username and password. i.e. super and sp-admin. if it not set to factory default. you can SSH into it via username and password you configured for in zone configuration for AP management for http / https access you have to enable it after SSH into to the AP.