cancel
Showing results for 
Search instead for 
Did you mean: 

How to integrate with Active directory or Radius with ZoneFlex R300 Access Point

tharindu_ranasi
New Contributor II
I Have ZoneFlex R300 Access Point. I want to integrate with active directory. How to do this stuff? It should be configure with radius server or without radius server. Pls anyone support me ASAP. 
6 REPLIES 6

oliver_grachegg
New Contributor
If you plan to use it to authenticate on an 802.1x SSID using AD credentials you will need a radius server.

Thanks.. have any other methods to do this..

Hi LionTR, 

If you want to authenticate users against an external Authentication  server, you will need to first  configure your  AAA server, then point *ZoneDirector* to the AAA server so  that requests will  be passed through * ZoneDirector* before access is granted.

ZoneDirector supports Active Directory AAA server.

However if you are  using AP in stand alone mode,  you can configure a 802.1x WLAN mapped to a radius server . 

Image_ images_messages_5f91c46b135b77e247a77a25_ecfbab815f977e42ef61efb57338143e_27330no94qx_inline-3755b515-0cce-42be-9d83-c9ec52438dbf-728600897.JPG1426610044


Thanks 
Munish

Got It thanks 🙂