cancel
Showing results for 
Search instead for 
Did you mean: 

Good day! New access point R720 untied. It does not load, the PWR LED is permanently lit in red.

pavel_rypich
New Contributor II
Good day! New access point R720 untied. It does not load, the PWR LED is permanently lit in red.
4 REPLIES 4

phil_coverdale_
New Contributor III
Hi Pavel.

It sounds likely that this AP will need to be replaced. Are you able to create a case on our support site?

Regards,

Phil.

Anusha_Vemula
Community Manager
Community Manager
Hi Pavel,

Try powering up the AP using different power sources. If that doesn't help, open a ticket with support team and we will replace it.

- Anusha

michael_brado
Esteemed Contributor II
Change the cable, change the PoE switch port, or the power injector...?

pavel_rypich
New Contributor II

Thanks to everyone, I tried different power supplies, it did not work, I took another AP R720 from the supplier, it booted without any problems with both the 802.3 af injector and PoH (95w). Damaged AP gave a refund. Our expert Maxim Malugin wrote that, most likely, this is a secure boot error.