cancel
Showing results for 
Search instead for 
Did you mean: 

Somewhat Tech Knowledgeable need help setting up Wlan after reset

andrea_dempsey_
New Contributor
I had to reset my ruckus router (long story), now I went through the setups to setup my WLAN but now I have to walk upstairs near the AP to connect to the WLAN and it says no internet. I have a AT&T modem, Ruckus Router and two APs. Please help.
1 REPLY 1

michael_brado
Esteemed Contributor II
Can you plug a PC into the router with an Ethernet cable, then look at your CMD: ipconfig  output?
That should show you an IP address, network mask, default-gateway IP, and maybe DNS. 

You have to configure similar on your APs if you reset them.
Labels