RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
05-25-2021 09:57 AM
Dear
05-25-2021 01:34 PM
Hi Abdullas,
None of the devices can do that in omnidirectional path.
Please provide more information like do you want to reach network connection on your building from a tower and then use indoor/outdoor APs to provide WiFi or you want to broadcast WiFi in 500M radius from a single point.
05-25-2021 05:48 PM
Dear
I want to use one out door device to broadcast wifi in 500m radius. Which can be accessed by clients in homes directly or with a WISP router in home. If send me your email address I will share my location and tower coordinates with KMZ file. In addition more than one outdoor device would be used if necessary for coverage area.
05-26-2021 06:16 AM
Hi Abdullah,
None of the single outdoor AP can cover 500m radius directly, because client devices also need immense tx power to send the data to AP.
If your clients are located on a specific location (buildings), you may want to use wireless bridges (RUCKUS P300. P-to-M) to extant network till a specific building and from there you can distribute the network using a local switch and multiple indoor/outdoor APs.
Again, no matter how powerful or high range AP you use, coverage is always governed by AP and client both.
05-26-2021 09:48 PM
Dear omer
If there is a RUCKUS device with beam forming technology in 36dbm transmit power.
