Ebay R710 cannot connect via SSH or browser. NMAP reveals several ports open
after factory reset
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-13-2020 10:23 PM
Just received used R710 from ebay auction. Plugged in to 12v power, factory reset, tried the phone app to try Typical Install, get the "Great you are connected to Unleased factory WiFi...." but when I hit start I get Unleashed Unable to fetch default configuration from the AP. So I try connecting via wire to 192.168.0.1, nothing, not SSH not HTTP or HTTPS. Nmap reveals:
Discovered open port 53/tcp on 192.168.0.1
Discovered open port 9999/tcp on 192.168.0.1
Discovered open port 18301/tcp on 192.168.0.1
Discovered open port 1883/tcp on 192.168.0.1
Discovered open port 8099/tcp on 192.168.0.1
So, is there anyway to fix this? Can I put Standalone or fresh version of Unleashed on it using the USB port? Can you upgrade the firmware using the USB?
Thanks in advance for your help,
John
Discovered open port 53/tcp on 192.168.0.1
Discovered open port 9999/tcp on 192.168.0.1
Discovered open port 18301/tcp on 192.168.0.1
Discovered open port 1883/tcp on 192.168.0.1
Discovered open port 8099/tcp on 192.168.0.1
So, is there anyway to fix this? Can I put Standalone or fresh version of Unleashed on it using the USB port? Can you upgrade the firmware using the USB?
Thanks in advance for your help,
John
6 REPLIES 6
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-14-2020 08:53 AM
Hi John,
I think we have already discussed this issue on another thread.
https://forums.ruckuswireless.com/ruckuswireless/topics/r710-cant-connect-to-web-gui-or-ssh
Regards,
Syamantak Omer
Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn
I think we have already discussed this issue on another thread.
https://forums.ruckuswireless.com/ruckuswireless/topics/r710-cant-connect-to-web-gui-or-ssh
Regards,
Syamantak Omer
Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RCWA | RASZA | RICXI
RUCKUS Networks, CommScope!
Follow me on LinkedIn
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-14-2020 08:56 AM
Sorry John, like so many before you, you've been sold an unsupported AP, and likely something that was bricked and damaged. I would submit to get your money back.
Also, on your NMAP, try using the -A switch. you'll likely find nothing 'listening' on those ports.
Also, on your NMAP, try using the -A switch. you'll likely find nothing 'listening' on those ports.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-07-2021 01:54 AM
I had the same issue. Solved by flashing a new firmware via tftp and connecting the onboard spi-pins.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-01-2021 08:47 AM
@jside Could you share some info about the pinout and connection settings?
Did you use a standard serial cable or something like an Arduino TTL serial cable or what??

