DHCP Confusion

[hafiz_nizar]

Please refer the image

[sanjay_kumar]

Hi Hafiz,

Please check the below link and refer page 373.
https://support.ruckuswireless.com/documents/2954-smartzone-5-1-2-administrator-guide-sz100-vsz-e/do...


Make sure the AP port on switch is trunk port allowing the VLANs configured on the SSID.

[hafiz_nizar]

Hi Sanjay,

Thanks for the documentation. I've read it it before actually.
Few questions here:
1) Corporate wifi VLAN gateway (2.2.2.1) is at the core switch. How do I create pool at the vSZ that include that gateway? I can't find the option to do that?
2) For the vSZ connection to the switch, should i set it as an access port or trunk port with native vlan?

[sanjay_kumar]

Hi Hafiz,

Here the AP will take the pool configured and will act like a DHCP server (depending on the configuration), AP will address the clients request.

You only need to make the AP port as trunk port carrying the VLANS. 

[hafiz_nizar]

Hi Sanjay,

That's great. If I configure the Corporate wifi DCHP pool as below:


Which IP will be the gateway for VLAN2?