Cannot connect on second and other SSID Unleashed R310

[rene_slager]

Hello, I got 5 R310 and spreading 3 SSID's over al the AP's but one of them is showing the SSID's but when I try to connect the client doesn't get a ip adres of the AP the others are all working fine. Idea?

Regards, Rene

[DarrelRhodes]

Hi Rene,
Do you have each of the WLANs mapped to a different VLAN?

Thanks,
Darrel.

[rene_slager]

Hi Darrel,

I have 3 diffrent VLAN's separated and assigned via the Unleashed portal to the SSID's. Ip ranges on the other AP's are good and separated by ip range.

Rene

[DarrelRhodes]

Hi Rene,

Thanks for the details.

It sounds like you have a VLAN mismatch or mapping issue.

Can you try swapping one of the working VLANs to the SSID/WLAN that you have the issue with to see if clients get an IP address, this will rule out issues with the WLAN config and confirm it is a VLAN issue.

Thanks,
Darrel.

[rene_slager]

Darrel,

That's strange because we don't have this issue on the other 4 Ruckus AP's so switching from VLAN don't make impact on the ssid...?

Regards,

Rene